CHASSIS
3-28 2007 - 2008 Titan Z Service Manual
3
32. Remove two clamps that secure the wire harness to
the outside, rear of the seat box (Fig. 099).
33. Remove the relay from the wire harness relay plug
(Fig. 100).
35. Remove the two screws and nuts that secure the
fuse block to the rear of the seat box assembly (Fig.
102).
34. Remove the screw and nut that secure the relay
harness plug to the rear of the seat box assembly
(Fig. 101).
Fig. 099 IMG-0283a
Fig. 100 IMG-0276
Fig. 101 IMG-0280a
Fig. 102 IMG-0330
To Next Page
Loading...
