Toro titan zx - Page 42

CHASSIS
3-16
Toro TITAN 2009-2013 Service Manual
3
Fig. 034 PICT-2080
6. Install the upper motion control damper washer and
shoulder bolt (A) to the activator arm (F) and torque
to specication - 7.5 ft-lbs. (10 Nm).
7. Index and install the eccentric and fastener (B).
Torque nut to specication – 8ft-lbs. (11 Nm).
8. If needed, install the control box back onto the frame
as outlined in this chapter.
9. Install the control lever and torque the fasteners to
specication - 30 ft-lbs. (40 Nm).
10. Perform the “Neutral Adjustment” and “Tracking
Adjustment” procedures on pages 5-4 and 5-6.
(Fig. 034)
Washer 1 - Standard pivot washer
Washer 2 - Standard pivot washer
Washer 3 - Standard pivot washer
Washer 4 - Teon washer
1
2
3
4
A
D
G
G
C
B
E
F