ENGINE
4-7
Toro TITAN 2009-2013 Service Manual
4
16. Apply Loctite
®
242 to the PTO clutch bolt threads.
17. Install the PTO clutch onto crankshaft. Be sure PTO
clutch engages with the clutch stop bracket.
18. Install and torque the PTO clutch bolt to specication
– 55 ft-lbs. (76 Nm).
19. Install PTO belt onto PTO clutch. Verify proper PTO
belt routing; see PTO Belt Replacement and Belt
Routing” on page 6-5. Install the PTO belt tensioner
spring to the deck.
20. Connect battery cables and verify engine oil level.
21. Safely start engine and verify proper operation.
To Next Page
Loading...
