Toro TITAN ZX6000 - Positioning the Seat; Adjusting the Motion Control Levers; Pushing the Machine by Hand

PositioningtheSeat
Theseatcanmoveforwardandbackward.Position
theseatwhereyouhavethebestcontrolofthe
machineandaremostcomfortable.
g027632
Figure25
AdjustingtheMotion
ControlLevers
AdjustingtheHeight
Note:Repeattheadjustmentfortheoppositecontrol
lever.
Themotioncontrolleverscanbeadjustedhigheror
lowerformaximumoperatorcomfort(Figure26).
g027252
Figure26
AdjustingtheTilt
Themotioncontrolleverscanbetiltedforeoraftfor
maximumoperatorcomfort.
1.Loosentheupperboltholdingthecontrollever
tothecontrolarmshaft.
2.Loosenthelowerboltjustenoughtopivotthe
controlleverforeoraft.Tightenbothboltsto
securethecontrolinthenewposition.
3.Repeattheadjustmentfortheoppositecontrol
lever.
PushingtheMachineby
Hand
Important:Alwayspushthemachinebyhand.
Nevertowthemachinebecausedamagemay
occur.
ToPushtheMachine
1.Parkthemachineonalevelsurfaceand
disengagethebladecontrolswitch.
2.Movethemotioncontrolleversoutwardto
neutrallockposition,stoptheengine,remove
thekey,andwaitforallmovingpartstostop
beforeleavingtheoperatingposition.Makesure
theparkingbrakeisdisengaged.
3.Dothisprocedureoneachsideofthe
machineFigure27.
g027642
Figure27
ToOperatetheMachine
Movethebypasstothepositionforoperatingthe
machine(Figure27)toengagethewheelmotors.
25