Toro TurfMaster 22205TE - Setting Up the Toro Walk-Behind Mower; Installing the Mower Handle; Adjusting Handle Height

SUPERCEDED
Setup
Important:Removeanddiscardtheprotectiveplastic
sheetthatcoverstheengineandanyotherplasticor
wrappingonthemachine.
1
InstallingtheHandle
NoPartsRequired
Procedure
WARNING
Foldingorunfoldingthehandleimproperlycan
damagethecables,causinganunsafeoperating
condition.
•Donotdamagethecableswhenfoldingor
unfoldingthehandle.
•Ifacableisdamaged,contactanAuthorized
ServiceDealer.
1.Removethe2boltsfromthemachineframeinthe
locationshowninFigure3.
G028426
1
2
g028426
Figure3
1.Bolt(2)
2.Nutonhandlesupport
bracket(2)
2.Rotatethehandlerearwardtotheoperatingposition.
3.Securethehandletothemachinewiththeboltsthat
youremovedinstep1.
4.Tightenthefastenersthatsupportthehandleonboth
sidesofthemachineasshowninFigure4.
G028427
2
1
3
g028427
Figure4
1.Installacabletiehere.
3.Bolt(4)
2.Nutonhandlesupport
bracket(2)
5.Installacabletietosecurethecablestothelower
handleinthelocationshowninFigure4andtrimoff
theexcessmaterialfromthetie.
2
AdjustingtheHandleHeight
NoPartsRequired
Procedure
1.Standintheoperatingpositiontodeterminethemost
comfortablehandleheight.
2.Removethehandleboltandinsertitin1ofthe3holes
locatedatthebottomofthehandlebracket(Figure5).
5