Toro XLS 380 - Servicing the Headlights; Cleaning; Washing the Underside of the Mower

ServicingtheHeadlights
Theheadlightsusean1156,automotive-typebulb.
RemovingtheBulb
1.Openthehood.
2.Disconnectthewireconnectorsfrombothofthe
bulb-holderterminals.
3.Rotatethebulbholder1/4turnclockwiseandremove
itfromthereector(Figure45).
Figure45
1.Bulb3.Bulbholder
2.Metalpins
4.Slots
4.Insertandrotatethebulbcounterclockwiseuntilit
stops(approximately1/4turn),andremovethebulb
fromthebulbholder(Figure45).
InstallingtheBulb
1.Alignthemetalpinsonthesideofthebulbbasewith
theslotsinthebulbholder.
2.Insertthebaseintotheholder(Figure45).
3.Pushandrotatethebulbclockwiseuntilitstops.
4.Alignthetabsonthebulbholderwiththeslotsinthe
reector,insertthebulbholderintothereector,and
rotateit1/4turnclockwiseuntilitstops.
5.Connectthewireconnectorstotheterminalsonthe
bulbholder.
Cleaning
WashingtheUndersideofthe
Mower
ServiceInterval:Beforeeachuseordaily
Washtheundersideofthemowertopreventgrassbuildup
forimprovedclippingdispersal.
1.Parkthemachineonalevelsurface.
2.Disengagethebladecontrol(PTO).
3.Stoptheengine,waitforallmovingpartstostop,and
removethekeybeforeleavingtheoperatingposition.
4.Attachthecoupling(notincluded)tothemower
washoutttingandturnthewateronhigh(Figure46).
Figure46
1.Washouttting
3.Hose
2.Coupling(notincluded)
Note:Spreadpetroleumjellyonthewashouttting
o-ringtomakethecouplingslideoneasierandto
protecttheo-ring.
5.Lowerthemowertothelowestheight-of-cut.
6.Sitontheseatandstarttheengine.
7.Engagethebladecontrol(PTO)andletthemowerrun
for1to3minutes.
8.Disengagethebladecontrol(PTO).
9.Stoptheengine,waitforallmovingpartstostop,and
removethekeybeforeleavingtheoperatingposition.
10.Removetheignitionkey.
11.Turnthewateroffandremovethecouplingfromthe
washoutttingandhose.
12.Runthemoweragainfor1to3minutestoremovethe
excesswater.
31