Toro Z Master 6000 Professional Series - Servicing the Fuses; Drive System Maintenance; Checking the Seat Belt; Checking the Rollover Protection System (ROPS) Knobs

g000960
Figure65
1.Positivebatterypost
3.Red(+)chargerlead
2.Negativebatterypost
4.Black(-)chargerlead
ServicingtheFuses
Theelectricalsystemisprotectedbyfuses.Itrequires
nomaintenance,however,ifafuseblowscheckthe
component/circuitforamalfunctionorshort.
1.Thefusesarelocatedontheconsoletotheright
oftheseat(Figure66).
2.Toreplacethefuses,pulloutonthefuseto
removeit.
3.Installanewfuse(Figure66).
g008966
Figure66
1.Optionalaccessory(15A)4.Main(25A)
2.Charge(25A)5.Console
3.PTO(10A)
DriveSystem
Maintenance
CheckingtheSeatBelt
ServiceInterval:Beforeeachuseordaily
Visuallyinspectseatbeltforwear,cuts,andproper
operationofretractorandbuckle.Replacebefore
operatingifdamaged.
CheckingtheRollover
ProtectionSystem(ROPS)
Knobs
ServiceInterval:Beforeeachuseordaily
WARNING
Toavoidinjuryordeathfromrollover:keep
therollbarinthefullyraisedlockedposition
andusetheseatbelt.
Ensurethattheseatissecuredtothe
machine.
Checkthatboththemountinghardwareandtheknobs
areingoodworkingcondition.Makesurethatthe
knobsarefullyengagedwiththerollbarintheraised
position.Theupperhoopoftherollbarmayneed
tobepushedforwardorpulledrearwardtogetboth
knobsfullyengaged(Figure67).
50