Toro Z Master 6000 Professional Series - Checking and Cleaning the Hydraulic Unit Shrouds

CheckingandCleaningthe
HydraulicUnitShrouds
ServiceInterval:Beforeeachuseordaily
Important:Thefastenersonthecoversofthis
machinearedesignedtoremainonthecover
afterremoval.Loosenallofthefastenerson
eachcoverafewturnssothatthecoverisloose
butstillattached,thengobackandloosenthem
untilthecovercomesfree.Thispreventsyou
fromaccidentallystrippingtheboltsfreeofthe
retainers.
1.Disengagetheblade-controlswitch(PTO)and
engagetheparkingbrake.
2.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Movetheseatforward.
4.Waitfortheengineandhydraulicsystemtocool.
5.Cleanthedebrisandgrassfromthehydraulic
unitshrouds(Figure80).
g010169
g010207
Figure80
1.Hydraulicunitshrouds
6.Overeachdipstick,removethecoverandthe
boltattachedtothecover.Cleanaroundeach
dipstickandhydraulicunit(Figure81).
g012434
Figure81
1.Cover
2.Bolt
7.Positiontheseat.
56