6-22
Z Master 7500-D Series Service Manual
March 2018 - Digital Edition
Table of Contents
DECK
Belt Replacement (Cont.)
Installation
1. Install the center belt on the machine rotating the idler assembly clockwise with a ½ in. drive.
2 Install the left and right belts on the machine rotating the idler assembly counter-clockwise with a 3/8 in. drive.
3. Install the floor pan.
4. Install the two lynch pins securing the outer belt guard to the deck. Repeat for opposite side.
5. Install the two lock nuts and two carriage bolts securing the inner belt guard. Repeat for opposite side.
To Next Page
Loading...
