Toro Z Master 7500-D Series - Page 129

6-35
Z Master 7500-D Series Service Manual
March 2018 - Digital Edition
Table of Contents
DECK
Deck
Spindle Assembly Rebuild (Cont.)
Disassembly (Cont.)
13. Move bearing spacer to the side in order to gain access to the inner race of the bottom bearing (Figure 35).
14. Gently tap inner race of lower bearing to remove from the housing. Alternate in a star pattern to avoid binding
when removing (Figure 36).
NOTE: Bearings may be damaged during removal. Replace as needed.
Figure 35
Figure 36