Toro Z Master 7500-D Series - Control Module; Testing

8-8
Z Master 7500-D Series Service Manual
March 2018 - Digital Edition
Table of Contents
ELECTRICAL
Control Module
The control module (Figure 6) records hours of operation when the ignition key is ON and the PTO switch is ON.
Testing
1. With the ignition switch in the RUN position and the PTO switch closed (ON), verify battery voltage and ground
to the control module.
A
B
C
D
Figure 6
A. Hours Until Hydraulic Maintenance
B. Battery Voltage
C. Safety Interlocks (PTO, Brake, Neutral, OPC)
D. Hours Until Engine Oil Maintenance