Toro Z Master 7500-D Series - Page 34

4-12
Z Master 7500-D Series Service Manual
March 2018 - Digital Edition
Table of Contents
ENGINE
Yanmar Engine Replacement (Cont.)
Removal (Cont.)
21. Remove the six bolts (three per side) securing the air shield and cross channel to the machine (Figure 13).
22. Disconnect the global power port and alarm (Figure 14).
23. Disconnect the wire harness clip retainers.
24. Lift the air shield and cross channel from the machine.
A
A
B
C
C
D
Figure 13
Figure 14
A. HHF Screw
B. Air Shield
C. NI HF Nut
D. Cross Channel