Toro Z Master 7500-D Series - Page 84

5-31
Z Master 7500-D Series Service Manual
March 2018 - Digital Edition
Table of Contents
CHASSIS
Chassis
Adjusting the Motion Control Damper
NOTE: The top damper mounting bolt can be adjusted to obtain a more desired motion control lever
resistance (Figure 22).
A
B C
D
E
Figure 22
A. Torque the lock nut to 200 in-lbs. (22.6 Nm)
B. Most Resistance (Firmest Feel)
C. Damper
D. Medium Resistance (Medium Feel)
E. Least Resistance (Softest Feel)