Toro Z Master 7500-D Series - Page 94

5-41
Z Master 7500-D Series Service Manual
March 2018 - Digital Edition
Table of Contents
CHASSIS
Chassis
Engine Cover (Cont.)
Installation
1. Using two people, one on each side of the hood, slide the hood to the left on the hinge pins until aligned.
2. With one person supporting the hood, place the washer and cotter pin onto the hinge pin.
3. Install the prop bracket on the pin.
4. While one person is supporting the hood, place the washer and cotter pin onto the prop bracket.
5. Close the hood and secure with the hood latches.