Toro Z Master G3 3000 Series - Page 113

HYDRAULIC SYSTEM
5-18 Toro Z Master G3 3000/5000/6000 Series Service Manual
5
48. Install the oor pan (Fig. 326).
Fig. 324 PICT-8541a
47. Reinstall the guard above the UHT (Fig. 325).
Fig. 325 PICT-8696
Fig. 326 PICT-8543
44. Install rear wheels and torque lug nuts to 90 - 95
ft-lbs. (122 - 129 Nm).
45. Lower the machine to the ground.
46. Connect the negative battery cable to the battery
(Fig. 324).