3.Turntheseat-supportplateover,sothatthe
bottomsideisfacingupward.
4.Ensurethattheheatshieldisorientedcorrectly
(Figure3),thenplacetheheatshieldontopof
theseat-supportplateandalignitwiththedrilled
hole.
5.Markthethreeremainingholelocationsonthe
heatshieldontotheseat-supportplate.
6.Removetheheatshield.
7.Drillthethreeholes(7mmor9/32inch)intothe
seat-supportplate.
g421739
Figure3
1.Heatshield3.Markanddrilltheholes
here.
2.Aligntheheatshieldwith
theseholes.
3
To Next Page
Loading...
