Toro Z Master Professional 7500-D Series - Page 64

g227849
Figure68
1.Hydraulic-tankcap3.Fillerneck
2.Dipstick
6.Removethedipstickandwipeitwithacleanrag
(Figure68).
7.Placethedipstickintothellerneck,removeit,
andchecktheuidlevel(Figure69).
Note:Ifthelevelisnotwithinthenotchedarea
ofthedipstick,addenoughhigh-qualityhydraulic
uidtoraisetheleveltowithinthenotchedarea.
Important:Donotoverll.
g228816
Figure69
1.Fullline2.Addline
8.Replacethedipstickandthreadthellcap
nger-tightontothellerneck.
9.Checkallhosesandttingsforleaks.
ChangingtheHydraulicFluidand
Filter
ServiceInterval:Aftertherst200hours—Change
thehydraulicuidandlter.
Every400hours—Changethehydraulicuid
andlterifusingMobil®424hydraulicuid.
Every800hours—Changethehydraulic
uidandlterifusingToroPremium
Transmission/HydraulicTractorFluid.
1.DisengagethePTO,movethemotion-control
leverstotheNEUTRAL-LOCKposition,and
engagetheparkingbrake.
2.MovethethrottlelevertotheSLOWposition,
shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Raisetheseat.
4.Placealargedrainpanunderthehydraulic
reservoirandtransmissioncase(Figure70).
2
3
1
4
g363195
Figure70
Undersideofthemachine
1.Rearframe
3.Hydraulicreservoirdrain
plug
2.Filter4.Transmissioncasedrain
plug
5.Unscrewtheltertoremoveandallowtheuid
todrainfromthereservoir.
Important:Beforeinstallingthenew
lter,applyathincoatofToroPremium
Transmission/HydraulicTractorFluidonthe
surfaceoftherubberseal.
Installanewlterandturnthelterclockwise
untiltherubbersealcontactsthelteradapter,
thentightenthelteranadditional2/3to3/4turn.
6.Wipealltheplugscleanandinstallalltheplugs.
7.Raisetherearofmachineandsupportitusing
jackstands(orequivalentsupport)justhigh
enoughtoallowthedrivewheelstoturnfreely.
64