Toro Z Master Z597 - Page 101

5-14 Z Master Z597 Diesel Service Manual
5
ENGINE
Fig 269 DSC-2451
13. Secure the two ground wires to the bracket located
below the starter motor on the engine (Fig. 269).
Fig 268 DSC-2489
12. Pull the spring loaded idler down and install the fan
drive belt (Fig. 268).
10. Install both the mower drive belts; refer to Replacing
Mower Drive Belts, page 7-41.
11. Install the bolt, spacer, washers, and nuts holding
the clutch/brake strap to the frame (Fig. 266). Follow
the hardware sequence in the diagram (Fig. 267).
Fig 266 DSC-2488
Fig 267 deck belt drive
A
B
C
D
E
F
G
B
A. Nut - lock E. Spacer, large
B. Washer, large F. Washer, at
C. Spacer G. Screw, HH
D. Grommet, brake