7-14 Z Master 597 Diesel Series Service Manual
7
MOWER DECKS
4. Install the rear and front lift chains to the mower
deck (Fig. 435).
Fig 435 DSC-2640
5. Remove the hitch pin on the lift handle and raise the
mower in the transport position.
6. Install a 4 x 4 wood block under the right side of the
mower deck.
7. Lower the mower deck down on the wood block.
8. Install the strut pin in the strut assembly. Install and
tighten the bolt and nut.
9. Install the rear and front lift chains to the mower
deck.
10. Raise the mower deck and remove the wood block
from under the mower.
Fig 437 DSC-2642
12 Install the left mower drive belt on the middle sheave
of the jackshaft pulley (Fig. 437).
Fig 436 DSC-2641
11. Install the right mower drive belt on the bottom
sheave of the jackshaft pulley (Fig. 436).
To Next Page
Loading...
