7-20 Z Master 597 Diesel Series Service Manual
7
Mower Spindle Disassembly
1. Remove the nut and washer (Fig. 457).
Fig 457 DSC-2669
2. Remove the pulley hub and square key (Fig. 458).
Fig 458 DSC-2670
MOWER DECKS
10. Raise the mower deck to the transport position.
11. Remove the mower blade from the spindle
assembly.
12. Remove the 6 bolts and nuts from the spindle
assembly. Remove the spindle assembly (Fig. 456).
Note: Early production units did not have nuts on
the bolts holding the spindle to the mower
deck, It is recommended to install ange nuts
to all of the bolts retaining the spindles to the
mower deck.
Fig 456 DSC-2666
Reverse the order of mower spindle removal.
Mower Spindle Installation
To Next Page
Loading...
