7-21Z Master 597 Diesel Series Service Manual
7
Fig 460 DSC-2672
4. Remove the spindle housing from the spindle shaft
assembly (Fig. 460).
Fig 459 DSC-2671
3. Remove the bearing shield (Fig. 459).
MOWER DECKS
5. Remove the seal spacer from the top of the spindle
housing (Fig. 461).
Fig 461 DSC-2673
6. Remove the seal spacer from the bottom of the
spindle housing (Fig. 462).
Fig 462 DSC-2674
To Next Page
Loading...
