7-37Z Master 597 Diesel Series Service Manual
7
MOWER DECKS
4. Relieve spring tension with the 3/8” ratchet drive to
allow for removal of the stop bolt, spacer, and nut
(Fig. 520).
Fig 520 DSC-2735
Fig 522 DSC-2741
6. Remove the bolt and nut retaining the idler bracket
to the frame (Fig. 522).
Fig 521 DSC-2737
5. Remove the bolt, spacer, 2 washers and nut on the
stationary end of the tension spring toward the rear
of the machine (Fig. 521).
7. Remove the left hand idler bracket (Fig. 523).
Fig 523 DSC-2742
To Next Page
Loading...
