7-38 Z Master 597 Diesel Series Service Manual
7
Left Hand Mower Idler Assembly
Installation
8. Inspect the bushing and sleeve bearing for wear
(Fig. 524).
Fig 524 DSC-2743
Fig 526 DSC-2737
2. Fasten the tension spring to the frame with the bolt,
spacer, 2 washers and a nut (Fig. 526).
Fig 525 DSC-2741
1. Install the left hand idler bracket to the frame with
bolt and nut (Fig. 525).
MOWER DECKS
3. Relieve the tension on the spring using a 3/8” drive
ratchet and 12” extension. Install the stop bolt,
spacer, and nut (Fig. 527).
Fig 527 DSC-2735
To Next Page
Loading...
