7-40 Z Master 597 Diesel Series Service Manual
7
Fig 532 DSC-2628
5. Remove the tension spring on the idler arm (Fig.
532).
Fig 531 DSC-2625
4. Raise the oor pan (Fig. 531).
MOWER DECKS
6. Remove the mower belt from the mower pulleys,
idler pulleys and the top groove of the triple sheave
jackshaft pulley (Fig. 533).
Fig 533 g. 71 m-7419
7. Install the new belt around the mower pulleys, idler
pulleys and the top groove of the triple sheave
jackshaft pulley (Fig. 534).
Fig 534 g. 71 m-7419
1. Triple sheave pulley 3. Mower spindle pulley
2. Mower belt 4. Mower idler pulleys
4
4
To Next Page
Loading...
