Toro Z Master Z597 - Page 191

7-44 Z Master 597 Diesel Series Service Manual
7
14. Remove the drive belts from the jackshaft sheave
pulley on the mower deck (Fig. 548).
Fig 548 DSC-2630
15. Install the new right mower drive belt on the bottom
sheave of the jackshaft pulley, the adjustable idler
pulley, and around the inner sheave of the PTO
clutch pulley (Fig. 549).
Fig 549 g. 74 m-7404
MOWER DECKS
1. Belt drive 4. Fixed idler pulley
2. Clutch 5. Three stacked pulleys
3. Spring loaded idler 6. Mower belt
pulley
Fig 547 DSC-2629
13. Remove the mower spindle belt from the top groove
of the jackshaft pulley (Fig. 547).
Fig 546 DSC-2628
12. Remove the tension spring (Fig. 546).