3-6 Z Master Z597 Diesel Service Manual
3
Fig 024 DSC-1546
3. Remove bearing spacers and the front caster
spacer. Remove the seals located on each side of
the wheel and both the tapered bearings (Fig. 024).
A. Bearing Spacer D. Caster Spacer
B. Bearing Seal E. Retaining wheel nut
C. Taper Bearing F. Retaining wheel bolt
Fuel Tank Removal
AA
B
B
C
C
D
E
F
4. Pack both tapered wheel bearings. Reassemble
per Fig. 024. Pump grease into the wheel bearings
through the grease tting located on the rim (Fig.
025).
Fig 026 DSC-1548
1. Disconnect the negative battery cable. Empty the
fuel tank.
2. Remove the fuel hose at the bottom of the fuel tank
(Fig. 026).
Fig 025 DSC-1547
Right Side Fuel Tank Removal
3. Remove the fuel return line located on the inside of
the fuel tank (Fig. 027).
Fig 027 DSC-1549
CHASSIS