Toro Z Master Z597 - Hood Assembly Installation; Throttle Control Replacement

3-12 Z Master Z597 Diesel Service Manual
3
1. Disconnect the negative battery cable.
2. Remove the 4 screws retaining the control panel to
the fuel tank (Fig. 046).
Throttle Control Replacement
Fig 046 DSC-1584
4. Remove the two locknuts and carriage bolts
retaining the throttle cable assembly (Fig. 048).
Fig 048 DSC-1591
3. Remove the ball knob located on the throttle control
by applying upward pressure under the knob (Fig.
047).
5. Disconnect the end of throttle cable at the swivel
clamp, located on the throttle linkage at the injector
pump (Fig. 049).
Fig 047 DSC-1586
Fig 049 DSC-1592
CHASSIS
Hood Assembly Installation
Reverse the order of removal.