3-13Z Master Z597 Diesel Service Manual
3
Installation
CHASSIS
6. Loosen the screw on the throttle casing clamp and
remove the throttle cable (Fig. 050).
1. Install the throttle control in the control plate. Install
the two carriage bolts and nuts and tighten (Fig.
052).
Fig 052 DSC-1596
Fig 050 DSC-1593
7. Keeping the tie straps in place, slide the throttle
cable through the two tie straps to remove it from the
machine. One tie strap is located at the radiator fan
motor mount, Ref. A, and the other is at the engine
removal bracket, Ref. B (Fig. 051).
NOTE: DO NOT cut or remove the tie straps.
2. Feed the throttle cable through the tie strap on the
radiator fan motor mount (Fig. 053).
Fig 051 DSC-1594
Fig 053 DSC-1597
A
B
To Next Page
Loading...
