Toro Z Master Z597 - Brake Band Installation; Brake Cross Shaft Removal

3-18 Z Master Z597 Diesel Service Manual
3
3. Remove bolts, brake band retainer, spacers, and
brake band (Fig. 069).
A. 3 Bolts
B. Brake Band Retainer
C. 3 Spacers
D. Brake Band
CHASSIS
Fig 069 DSC-1626
Fig 071 DSC-1631
2. Install the 3 bolts, brake band retainer, brake band,
and spacers and tighten (Fig. 071).
A
B
C
D
1. Install the brake band around the wheel hub (Fig.
070).
Brake Band Installation
Fig 070 DSC-1629
3. Install tire assembly and the 4 wheel bolts.
Brake Cross Shaft Removal
1. Raise the rear end of the unit and remove the right
and left rear tires.
Note: To prevent the unit from rolling, block the two
front tires.