3-23Z Master Z597 Diesel Service Manual
3
CHASSIS
4. Loosen jam nuts on LH and RH deck lift rods until
deck support springs are fully extended (Fig. 086).
Fig 086 DSC-1649
5. Remove hex nut from RH rear deck lift assembly.
Repeat procedure for LH rear deck lift assembly
(Fig. 087).
Fig 087 DSC-1650
Fig 085 DSC-1648
1. Park the machine on a level surface, disengage the
blade control (PTO), and turn the ignition key to OFF
to stop the engine. Remove the ignition key.
2. Remove the lower stop bolt from the deck lift plate
(Fig. 084).
Fig 084 DSC-1647
Deck Lift Lever Removal
3. With the mower deck in the transport position, place
a 4”x 4” block under each corner of the deck. Lower
the mower deck onto the support blocks to remove
the weight from the support chains (Fig. 085).
To Next Page
Loading...
