3-24 Z Master Z597 Diesel Service Manual
3
6. Lower lift lever to its lowest position. Rear deck
swivel mounts should clear deck lift rods on both
sides. The mower deck lift linkage should now be
fully unloaded (Fig. 088).
Fig 088 DSC-1651
7. Remove hex bolt, nut, and lift lever bushing from the
lower deck lift plate mounting location (Fig. 089).
Fig 089 DSC-1652
A
A. Lift Lever at lowest position
8. Loosen the top hex head ange nut at the deck lift
plate mounting location. Pivot the INNER deck lift
plate up and back toward the RH motion control
lever (Fig. 090).
Fig 090 DSC-1653
9. Lift the oor pan assembly to its fully opened
position (Fig. 091).
Fig 091 DSC-1654
CHASSIS
To Next Page
Loading...
