Toro Z Master Z597 - Page 46

3-25Z Master Z597 Diesel Service Manual
3
CHASSIS
12. When removing the lift lever you may experience
interference with the RH oor pan hinge or the front
edge of the RH motion control plate, or both (Fig.
094).
Fig 094 DSC-1657
13. If the lift lever contacts the RH oor pan hinge,
loosen the RH oor pan hinge mounting hardware.
Push the RH hinge upward. Re-tighten the RH oor
pan hinge mounting hardware (Fig. 095).
Fig 095 DSC-1661
Fig 093 DSC-1656
11. Remove retainer clip from lift lever (Fig. 093).
Fig 092 DSC-1655
10. Remove hex bolt, bushing, and nylock nut
connecting the deck lift arm plates to the mower
deck rear cross-shaft lift assembly (Fig. 092).
A
B
A. RH Floor pan hinge B. RH Motion control plate
A. RH Floor pan hinge
A