Toro Z Master Z597 - Page 48

3-27Z Master Z597 Diesel Service Manual
3
CHASSIS
5. Install hex bolt through deck lift plates and rear
lift arm cross shaft bushing. Install nylock nut and
tighten (Fig. 102).
Fig 102 DSC-1675
6. Rotate deck lift plate (inner) downward until lower
mounting holes line up with hole in carrier frame and
deck lift plate (outer). From the outside of the frame,
install hex bolt, spacer, and anged lock nut as
shown. Tighten bolt (Fig. 103).
Fig 103 DSC-1677
Fig 101 DSC-1674
4. Install bushing into rear lift arm cross shaft (Fig.
101).
Fig 100 DSC-1672
3. Install retainer clip to lift lever shaft (Fig. 100).
A
A. Bushing
A
A
B
A. Rear Lift Arm Plates B. Hex Bolt
A B C
A. Hex Bolt C. Flanged Lock Nut
B. Spacer