3-31Z Master Z597 Diesel Service Manual
3
CHASSIS
9. Remove the cotter pin and clevis pin through the
adjustable yoke for the neutral return bolt (Fig. 117).
10. Remove the two bolts and nuts that retain the ange
bearing on the inside of the motion control (Fig. 118).
Fig 117 DSC-2064
Fig 118 DSC-2066
7. Disconnect neutral switch wire harness from neutral
switch (Fig. 115).
8. Remove bolt, spacer, and nut that retains the ball
joint to the motion control (Fig. 116).
Fig 116 DSC-2063
Fig 115 DSC-1693
To Next Page
Loading...
