99-8939
1. Read the Operator’s
Manual .
3. Remove the ignition key
and read the instructions
before servicing or
performing maintenance.
2. Height of cut
99-8944
1. Explosion hazard—wear
eye protection.
3. Fire hazard—no re, open
ames, or smoking.
2. Caustic liquid/chemical
burn hazard—to perform
rst aid, ush with water.
4. Poison hazard—keep
children away from the
battery.
105-6183
1. Read the Operator’s
Manual.
3. Rotate the bypass valve out
to push the machine.
2. Use a wrench to rotate the
bypass valve.
4. Rotate the bypass valve in
to drive the machine.
106-5517
1. Warning—do not touch the hot surface.
107-1686
1. Read the Operator’s
Manual before servicing or
performing maintenance.
5. Tire pressure
2. Time interval 6. Grease here
3. Air lter 7. Check and perform any
maintenance necessary
4. Hydraulic oil level
107-1866
1. Sliding and loss of control hazard and tipping hazard,
drop-offs—do not operate the machine near drop-offs,
slopes greater than 15 degrees, or water; keep a safe
distance from drop-offs; do not turn sharply while traveling
fast, instead, slow down and turn gradually; if the roll bar is
raised, wear the seat belt; if the roll bar is lowered, do not
wear the seat belt.
9
To Next Page
Loading...
