TORP TC500 - Connect the Controller to the App; How to Connect?

WWW.TORPMOTORS.COM
8
CONNECT THE CONTROLLER
TO THE APP
for further setup.
HOW TO CONNECT?
To connect the TC500 controller with the
Torp Controller App, first go to the Google
Play Store (Android) or AppStore (IOS) and
download the App to your smartphone.
-Allow the App to access the phone's
location, photos and media and accept the
Terms & Conditions.
-Put the key into the ignition and turn on
your bike.
-The App will automatically detect your
controller.
-Choose your controller from the list. The
Bluetooth ID can be found on the label on
the side of the controller.
-Now you are connected and can start
setting up your controller.
We suggest you always ride with the app set to the 1s screen. This is how the Torp Controller
App will be able to recognize potential errors which will help our support team with detecting
and solving any problems that might occur with the controller.
IMPORTANT: After the installation make sure to calibrate the throttle and Hall sensors! Go to the
5th screen of the Torp App and click the CALLIBRATION button. Then follow the setup Wizard.
CALLIBRATION must be repeated after each firmware update!