TORQ TORQX - Product Specifications and Parts Identification; Tool Specifications Overview; Identification of Tool Components

TORQ Tool Company Random Orbital Polisher
The Values shown are based on nominal voltage of 120 V / 60 Hz. In the case of volt-
ages and frequencies of different power, values may vary. Refer to the label techni-
cal specications to the nominal values of the tool.
Model TORQX
Protection Class II
Power W 680 W
Speed Control Yes
Rotation OPM 2800 / 7800
Backing Plate Fixing Thread M8 (5 / 16,8 mm)
Plate Diameter (inch) 5″
Pad Type Velcro Faced
Orbit 8 mm
Weight (lb) 4,85 lbs
PARTS OF THE TOOL
1. Identication Plate
2. ON/OFF Switch
3. Total Control Speed Adjust Dial
4. Back-Up Pad Fixing Screw
5. Handle
6. Ergonomic Comfort Grip Handle
7. Power cord with plug
8. Velcro faced back-up pad
9. Motor ventilation slots
10. Integrated Cooling
11. Speed Exchange Port