Do you have a question about the Torqeedo Cruise R and is the answer not in the manual?
Voltage | 48 V |
---|---|
Integrated GPS | Yes |
Emergency Magnetic Stop Switch | Yes |
Comparable Petrol Outboard | 9.9 HP |
Motor Technology | Brushless permanent magnet motor |
Battery Capacity | Depending on battery type |
Charging Time | Depending on battery and charger type |
Max Speed | Depending on battery and boat type |
Details product identification plates, symbols, and technical specifications.
EC conformity declaration, directives, and applied standards for the product.
Lists all components included in the complete scope of supply for Cruise models.
Identifies and illustrates operating instruments and components for Cruise models.
Step-by-step guide for mounting the motor drive unit to the boat transom.
Instructions for connecting the Cruise R outboard to a remote steering system.
How to fix the motor in a steering position when not using remote steering.
Guide for mounting the remote throttle control or tiller with integrated display.
General advice on battery types, capacity calculation, and performance considerations.
Safety and technical guidelines for connecting multiple batteries in series or parallel.
Detailed instructions for connecting the motor to Torqeedo Power 26-104 lithium batteries.
Guide for connecting the motor to lead-acid, Gel, AGM, or conventional lithium batteries.
Advice on preventing damage when connecting other devices to the motor's battery bank.
Guidelines for using solar panels and generators with the motor's battery system.
Instructions on how to start and operate the motor for driving.
Explanation of the multifunction display, its indicators, and signal tones.
How to use the battery charge display with the Power 26-104 battery and establish communication.
How to configure display units and switch the battery on/off.
How to set up and calibrate the battery charge display for non-Torqeedo batteries.
Describes the three ways to stop the motor in exceptional or emergency situations.
Lists common error codes, their causes, and recommended actions for troubleshooting.
Explains the function of the tilt mechanism and trimming positions on the transom mount.
Details the components in the pylon and integrated protective functions.
Information on corrosion resistance and care procedures after use, especially in salt water.
Detailed instructions on how to remove and install a new propeller.
Recommendations for cleaning the motor using plastic-suitable cleaning agents.
Schedule for performing maintenance tasks based on time intervals or operating hours.
Guidelines for trailering boats with the outboard motor mounted, including tilt position.
Details the warranty period, exclusions, and conditions for claims.
Outlines the required steps and documentation for submitting a warranty claim.