Torrot MUVI - MUVI Battery Management; Battery Charging and First Use; Battery Safety and Maintenance; Smartphone Synchronization

Batteries charging
B. Batteries: charging and correct use
VEHICLE FIRST USE
1. Power on the motorcycle and check that the low battery
voltatge picture is not shown.
2. Do not remove the batteries when vehicle is powered on.
3.These batteries are heavy, 8 Kg each one. It is essential
removing them very carefully, putting one hand in the handle
and the other one below the battery to avoid damages to the
vehicle, on the battery or even injuries caused by imbalance
or sliding.
4. Before the rst charge, check that the red switch of the
charger has the correct voltatge position related to your
country (110V/220V).
Register
1. DOWNLOAD OUR APP FOR FREE
2. Register in the APP lling out the gaps:
C. Synchronize MUVI with your smarthphone
Connection with the vehicle
¡NOW YOU ARE READY
TO SYNCHRONIZE
MUVI WITH YOUR
SMARTPHONE!
1. Start the scanner of
bluetooth devices
2. Select MUVI ID.
3. Introduce your MUVI
PIN Code
The ID device and PIN of the vehicle
is placed below the seat
4. Finally, after introducing the correct pas-
sword, ¡Your smartphone will be connected to
MUVI!
8 KG
3
4
1
LOW
BATTERY
WARNINGS AND BATTERIES MAINTENANCE
• Charge batteries to the maximum level before every use.
• Do not never let the battery level below the 20% of charge.
• The warranty of the batteries gets annul if the battery is without being
charged below the 20% of the battery level more than 40 days.
• Do never charge the batteries with the charger inside the vehicle.
• Avoid charging and exposing the batteries to extreme
cold or extreme hot.
• Avoid hits, vibrations or high humidity environments.
• It is forbbiden to manipulate the batteries or the charger.
5. Batteries’ are make up of High Energetic density Ion Lithium cells. Do not manipulate them in any case. Disobey this instruction
has electrical and chemical hazard and can involve material damages and serious personal harm.
5