2.1 General Description
As a double conversion on-line UPS, it is able to supply uninterrupted, clean
single-phase power to your critical systems while keeping batteries charged
continuously, even if the utility power fails.
Other features of the UPS includes
• Auto-Restart feature (See detailed explanation on page 4)
• Cold Start feature
• Programmable Load Shed Receptacle
• Intelligent Charger with Rapid Charge in only 4 hours to 90%
• Wide Input Voltage Window
• Wide Input Frequency Window for Complete Generator Compatibility
• Input Power Factor greater than 0.97
• Output Power Factor:
1000VA – 0.7
1500VA – 0.7
2000VA – 0.7
2400VA – 0.8
3000VA – 0.7
6000VA – 0.7
• Multiple Languages LCD Display
• Efficiency Optimizer Function – See detail explanation on page 3
• Free Run Mode - See detailed explanation on page 4
• Diagnostic Tests - See detailed explanation on page 4
• Optional Network Interface Card, RemotEye II
• Optional Environmental Monitoring Device
• Auto-Restart in ON-Line mode after UPS shutdown.
• No Cold Starts on first use (safety purpose) (See detailed explanation
on page 6)
To Next Page
Loading...
