Toshiba 1000 Series - Additional Front Panel Settings

17
Settings
Options
Default
Remarks
7) OUTLET
SETTING
GROUP1/GROUP2
Option 1: 1 On /2 On
Option 2: 1 Off /2 On
Option 3: 1 Off /2 Off
Option 4: 1 On /2 Off
Option 1
This is a load-shed feature.
8)BATTERY TEST
TEST?
Perform battery test
immediately
9) SILENCE SET
ON/OFF
OFF
10)BAT CABINET
SET
0: EXT B. PACKS
1: EXT B. PACKS
2: EXT B. PACKS
0
Shown options when battery
Cabinets are connected
11) SITE FAULT
SET
ENABLE/DISABLE
DISABLE
Alarm on main computer
connected at wrong polarity
or
Installation to main supply
without group.
12) LANGUAGE
ENGLISH
GERMAN
FRENCH
SPANISH
ITALIAN
ENGLISH
13) GENERATOR
ON/OFF
OFF
If ON, UPS will work with a
wide range of voltages and
frequencies, without
switching back and forth
between Line and Battery
mode.
14) RS232
CONTROL
ENABLE/DISABLE
ENABLE
Option to enable and disable
the RS232 port. USB share
the communication line with
RS232. Only one option may
be used at a time.
Complete the installation entirely before changing the default settings or connecting a load to the
UPS.