English
34
CONTROLS AND FEATURES
MPEG NR
If the receiving signal of MPEG has a grained
noise depending on the compression and
conversion, the noise may be reduced when
using this function.
In the menu, press ▲ or ▼ to
highlight and press ► or
to enter.
Press ▲ or ▼ to highlight and press
► or to enter.
Select the and press ◄ or ► to
select or.
NR
Select Back Exit
EXITRETURN
Auto
Low
DNR
MPEG NR
CTI
The Colour Transient Improvement (CTI) involves
the detection and sharpening of edges around
colour objects on the screen.
In the menu, press ▼ to
highlight and press ► or
to enter.
Select the and press◄ or ► to select
or .
Adaptive Luma Control
Automatically adjusts the brightness and contrast
after analyzing the input signal. This function
enriches the colours and the depth of the picture.
In the menu, press ▼ to
highlight and press ► or
to enter
Press▼ to highlight
and press ◄ or ► to adjust your
preference.
Active Backlight
When Active Backlight control is activated, it will
automatically optimise the backlighting levels for
dark scenes.
In the menu, press ▼ to
highlight and press ► to
enter.
Press ▼ to highlight and
press ◄ or ► to select or
Blue Screen
When is selected, the screen will
turn blue and the sound will be muted when no
signal is received.
In the menu, press ▼ to
highlight and press ► or
to enter
Press ▼ to highlight and press
◄ or ► to select or
3D Colour Management
When is selected, it
allows the ‘’ feature to
become available.
In the menu, press ▲ or ▼ to
highlight and press ► or
to enter.
Press ▲ or ▼ to highlight
Select Back Exit
EXITRETURN
7
Advanced Video
OnCinema Mode
Auto
On
Off
NR
CTI
Adaptive Luma Control
OnActive Backlight
Blue Screen
3D Colour Management
Base Colour Adjustment
ClearFrame
Press ◄ or ► to select or .
To Next Page
Loading...
