20
Introduction
TV back panel connections
6 VOLUME buttons —When no menu is onscreen, these
buttons adjust the volume level.
7 INPUT—Changes the source you are viewing. Press
repeatedly to change from one source to the next.
8 HDMI
®
IN—High-Definition Multimedia Interface input receives
digital audio and uncompressed digital video from an HDMI
®
device or uncompressed digital video from a DVI device. HDMI
®
connection is necessary to receive 1080p signals.
9 USB port—Accesses JPEG or MP3 files.
TV back panel connections
For explanations of cable types and connections, see “Overview of
cable types” on page 22.
(Sample Illustration) Back panel connections
1 PC IN—For use when connecting a personal computer.
2 HDMI
®
IN—High-Definition Multimedia Interface input
receives digital audio and uncompressed digital video from an
HDMI
®
device or uncompressed digital video from a DVI
device. HDMI
®
connection is necessary to receive 1080p
signals.
3 PC/HDMI-1 (Audio) IN—PC audio input terminal is shared
with an HDMI-1 analog audio input terminal, and its use can
be configured in the Audio Setup menu, see “Setting the PC
Audio” on page 95.
4 ANT/CABLE—Antenna input that supports analog (NTSC)
and digital (ATSC) off-air antenna signals and analog and
digital Cable TV (QAM) signals.
5 Digital AUDIO OUT—Optical audio output in Dolby
®
Digital
or PCM (pulse-code modulation) format for connecting an
external Dolby Digital decoder, amplifier, or home theater
system with optical audio input.
To Next Page
Loading...
