Toshiba 24P1300 Series - Activating the Picture Mode; Sound Adjustment; Setting the MTS (Multi-channel TV Sound)

– 13 –
Activating the Picture Mode
This TV o ers the choice of personalising the picture
style.
Dynamic, Standard, Mild, Movie and Game are
preset options and a ect many features/settings
within the TV.
• Use menus: PICTURE and Picture Settings
• Use the item: Picture Mode
Note:
Game mode is available in external input mode (other
than aerial input). When you select Game mode,
suitable widescreen formats will be selected.
Activating the picture preferences
You can customise current Picture Mode settings
as desired.
• Use menus: PICTURE and Picture Settings
• Use items: Contrast, Brightness, Colour, Tint and
Sharpness
Setting the Contrast Booster
Contrast Booster improves the contrast of the
picture.
• Use menus: PICTURE and Picture Settings
• Use the item: Contrast Booster
• Use modes: High, O , Low and Middle
Using the Cinema Mode
A movie  lm’s picture runs at 24 frames a second,
whereas movie software such as DVD, etc., that you
enjoy watching on TV at home runs at 30 (NTSC)
or 25 (PAL) frames a second. To convert this signal
to reproduce a smooth motion and picture quality,
select the On mode.
E ective signal and setup conditions:
• When the Video input mode is selected.
• When the input signal format is 480i, 576i or 1080i
signals.
• Use menus: PICTURE and Picture Settings
• Use the item: Cinema Mode
Note:
When a DVD movie with subtitle is playing back, this
mode may not work correctly.
Adjusting the Colour Temperature
Colour Temperature increases the warmth or
coolness of the picture by setting the red, green or
blue tint.
• Use menus: PICTURE and Picture Settings
• Use items: Colour Temperature, Red Level,
Green Level and Blue Level
• Use modes: Cool, Natural and Warm etc.
Activating the Noise Reduction (NR)
If the receiving signal of MPEG is a mosquito
(grained) noise depending on the compression and
conversion, the picture is weak and the picture is
blurry, the picture may be improved when using this
function.
• Use menus: PICTURE, Picture Settings and Noise
Reduction
• Use items: Auto Clean, MPEG NR and DNR
• Use modes: Low, Middle, High and O etc.
Resetting the Picture Settings
• Use menus: PICTURE and Picture Settings
• Use the item: Reset (select Ye s and press OK)
Adjusting the Colour Management
You can adjust the picture colour quality by
selecting from 6 base colour adjustments : Red,
Green, Blue, Yellow, Magenta or Cyan.
• Use menus: PICTURE, 3D Colour Management
(On) and Base Colour Adjustment
• Use items: Hue, Saturation and Brightness
Resetting the Base Colour Adjustment
• Use menus: PICTURE, 3D Colour Management
(On) and Base Colour Adjustment
• Use the item: Reset
Sound adjustment
Setting the MTS (Multi-channel TV Sound)
Auto mode
The MTS Auto mode automatically recognize
stereo/bilingual programmes depending on the
broadcast signal.
Mono mode
If you experience noise or poor reception of any
stereo/bilingual programme, set the MTS mode to
Mono.
Noise will be reduced and reception may improve.
• Use the menu: SOUND
• Use the item: MTS
Note:
If you experience noise with a particular programme
on whose channel reception is usually good, try setting
MTS mode to Auto, then switch
s
to e Mono
(monaural).
242932P1300SeriesEn.indd13242932P1300SeriesEn.indd13 2013/04/0810:07:042013/04/0810:07:04