EasyManua.ls Logo

Toshiba 26W300P - Manual Tuning

Toshiba 26W300P
37 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
E
Manual tuning
Usually the Auto Tuning stores all available stations in the reception area. If some stations have
poor reception, they may not be stored - however, you can store these manually if you wish.
Example: Preset the ZDF on program position 2.
Preparation:
Select program position 2.
1
Press MENU, the menu will appear
on the screen.
Press
or to select
(SETUP) menu.
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
LANGUAGE
ENGLISH
VERTICAL POSITION 0
AUTO 4:3 DEFAULT
16:9
2
Press or to select MANUAL
TUNING, then press ENTER.
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
LANGUAGE
ENGLISH
VERTICAL POSITION 0
AUTO 4:3 DEFAULT
16:9
3
Press or to select COLOUR
SYSTEM, then press ENTER.
Press
or to select AUTO, PAL
or SECAM, then press ENTER.
Please note that PAL should be
selected for use in UK.
EXIT : END MENU: RETURN
SEARCH
FINE 48.25MHz
COLOUR SYSTEM
AUTO
SOUND SYSTEM
AUTO
VOX 48.25 MHz
AUTO
4
Press or to select SOUND
SYSTEM, then press ENTER.
Press
or to select AUTO, B/G, I,
D/K or L/L’, then press ENTER.
SEARCH
FINE 48.25MHz
COLOUR SYSTEM
AUTO
SOUND SYSTEM
AUTO
Notes:
Select L/L’ when you receive a SECAM broadcast.
If you select AUTO, SECAM broadcast cannot be
received.
Sometimes when AUTO is selected no sound is output. If
this happens select an option other than AUTO.
5
Press or to select SEARCH,
then press ENTER.
Press
. The auto search begins.
It will stop at each station that has
a good enough reception. Press
again until you receive a clear ZDF
picture, then press ENTER.
If you want to stop the search
manually, press ENTER while the
frequencies is countinig up.
EXIT : END MENU: RETURN
SEARCH
FINE 48.25MHz
COLOUR SYSTEM
AUTO
SOUND SYSTEM
AUTO
ZDF 125.60 MHz
6
The auto search should find the best
reception automatically, so fine tuning
is not normally necessary. However
if you want to you can fine tune the
reception manually…
Press
or to select FINE, then
press ENTER.
Press
or to tune the receivable
frequencies depending on TV norm,
installation site, and range, then press
ENTER.
EXIT : END MENU: RETURN
SEARCH
FINE 125.65MHz
COLOUR SYSTEM
AUTO
SOUND SYSTEM
AUTO
ZDF 125.65 MHz
7
Repeat the steps 3 and 6 to preset other TV stations.
8
Press EXIT to return to the normal screen.
32L0141B_Eng.indd 1532L0141B_Eng.indd 15 6/7/2007 9:21:15 AM6/7/2007 9:21:15 AM

Related product manuals