Toshiba 26W300P - Stereo Reception with the Built-In Tuner

20
Stereo reception with the built-in tuner
The built-in Tuner can detect and
receive NICAM stereo broadcasts
automatically.
Note:
In case of bad reception, the stereo
sound also can be disturbed.
NICAM stereo sound reception:
1
Press MENU, the menu will
appear on the screen.
Press
or to select
(AUDIO) menu.
EXIT : END MENU: RETURN
NICAM AUTO
BASS 25
TREBLE 25
BALANCE 0
SURROUND OFF
SPEAKERS ON
2
Press or to select NICAM,
then press ENTER.
Press
or to select AUTO
or OFF.
Select OFF if you want to revert
to standard mono FM audio
reception.
EXIT : END MENU: RETURN
NICAM AUTO
BASS 25
TREBLE 25
BALANCE 0
SURROUND OFF
SPEAKERS ON
AUTO
3
Press EXIT to return to the normal screen.
The following types of broadcast are possible with
NICAM transmissions
‘NICAM ST’ illuminates
for approx. 4 seconds
when a NICAM
STEREO broadcast
signal is received.
‘NICAM M1’ illuminates
for approx. 4 seconds
when a NICAM MONO
A broadcast signal is
received.
‘NICAM M1/M2’
illuminates for approx. 4
seconds when a NICAM
MONO A and MONO
B broadcast signal is
received.
This will be displayed
for approx. 4 seconds
if a NICAM signal is
received when the
‘NICAM OFF’ option is
selected.
Stereo reception in Germany
‘STEREO’ illuminates for
approx. 4 seconds when
a STEREO broadcast
signal is received.
NICAM M1
NICAM OFF
NICAM M1 / M2
NICAM ST
STEREO
32L0141B_Eng.indd 2032L0141B_Eng.indd 20 6/7/2007 9:21:17 AM6/7/2007 9:21:17 AM