Toshiba 26W300P - Picture Enhancements

25
E
DNR/Selecting the colour temperature
DNR
DNR (Digital Noise Reduction) can reduce the roughness of the
picture.
1
Press MENU, the menu will
appear on the screen.
Press
or to select
(PICTURE) menu.
EXIT : END MENU: RETURN
PICTURE PREFERENCE
SPORTS
BRIGHTNESS 25
CONTRAST 50
COLOUR 25
TINT 0
SHARPNESS 0
2
Press or to select DNR,
then press ENTER.
Then press
or to select
OFF, LOW, MEDIUM or HIGH.
EXIT : END MENU: RETURN
DNR OFF
COLOUR TEMPERATURE
COOL
BLUE BACK ON
BACKLIGHT 16
RESET
OFF
EXIT : END
DNR
MENU: RETURN
OFF
3
Press EXIT to return to the normal screen.
Selecting the colour temperature
Change the picture quality by selecting from three preset colour
temperatures - cool, medium and warm - as described in the
following table;
1
Press MENU, the menu will
appear on the screen.
Press
or to select
(PICTURE) menu.
EXIT : END MENU: RETURN
PICTURE PREFERENCE
SPORTS
BRIGHTNESS 25
CONTRAST 50
COLOUR 25
TINT 0
SHARPNESS 0
2
Press or to select
COLOUR TEMPERATURE, then
press ENTER.
Press
or to select the
desired setting.
EXIT : END MENU: RETURN
DNR OFF
COLOUR TEMPERATURE
COOL
BLUE BACK ON
BACKLIGHT 16
RESET
COOL
Mode Picture Quality
COOL Bluish
MEDIUM Neutral
WARM Reddish
3
Press EXIT to return to the normal screen.
Note:
In HDMI1, HDMI2, or COMPONENT
mode, the “DNR” option cannot be
selected.
32L0141B_Eng.indd 2532L0141B_Eng.indd 25 6/7/2007 9:21:19 AM6/7/2007 9:21:19 AM