29
E
Adjusting the AV colour setting/Reset the TV
Adjusting the AV colour setting
The AV colour setting affects the AV inputs only - the TV’s
tuner is not affected. Please refer to pages 33 and 34 for more
information about connecting other equipment.
1
Press MENU, the menu will
appear on the screen.
Press
or to select
(SETUP) menu.
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
LANGUAGE
ENGLISH
VERTICAL POSITION 0
AUTO 4:3 DEFAULT
16:9
2
Press or to select AV
COLOUR, then press ENTER.
Press
or to select AUTO.
EXIT : END MENU: RETURN
AV1 INPUT AV
AV2 INPUT AV
AV COLOUR
AUTO
RESET TV SETTING
AUTO
3
If AUTO option does not work,
press
or to select your
desired colour system setting
(e.g. NTSC 3.58).
4
Press EXIT to return to the normal screen.
Note:
PAL is the colour system used in Germany. NTSC 3.58 is
used in the USA, PAL 60 used in Germany handled video
recorders, which play NTSC video tape recording.
DVD players that play NTSC DVDs (i.e. multi-region/region
code-free), can produce different signals according to
each particular model - the following signals may be output
from the player: PAL, SECAM, NTSC 3.58, NTSC4.43 and
PAL60. If possible select RGB on the DVD player as the
output signal instead of any of these types, and connect the
DVD player to TV with a SCART cable.
Reset the TV
This function will delete all stored channels and settings. The
television will return to factory settings.
1
Press MENU, the menu will
appear on the screen.
Press
or to select
(SETUP) menu.
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
LANGUAGE
ENGLISH
VERTICAL POSITION 0
AUTO 4:3 DEFAULT
16:9
2
Press or to select RESET
TV SETTING, then press ENTER
to enter the RESET TV SETTING
menu.
EXIT : END MENU: RETURN
AV1 INPUT AV
AV2 INPUT AV
AV COLOUR
AUTO
RESET TV SETTING
3
Press or
to select YES,
then press ENTER. Reset the TV
function will now begin, and this
unit will automatically turn off.
EXIT : END MENU: RETURN
DO YOU WANT TO RESET?
YES
NO
32L0141B_Eng.indd 2932L0141B_Eng.indd 29 6/7/2007 9:21:20 AM6/7/2007 9:21:20 AM
To Next Page
Loading...
