Toshiba 26W300P - PC Connection Settings; Picture Menu Options; Audio Menu Options

31
E
Description about the each setting option:
PICTURE Menu
BRIGHTNESS and CONTRAST: You can adjust
these according to your personal preferences.
HOR POSITION and VER POSITION: to adjust the
horizontal and vertical placing of the image.
PHASE and CLOCK: eliminates the horizontal
(PHASE) and vertical (CLOCK) interfering lines.
RED/GREEN/BLUE: influences the colour balance.
BACKLIGHT: Press
or to adjust the level you
require.
WXGA INPUT: When you input an WXGA signal,
set this option to ‘ON’.
RESET: Press ENTER to reset BRIGHTNESS,
CONTRAST, RED, GREEN and BLUE to the factory
preset values.
AUDIO Menu
BASS/TREBLE/BALANCE: Tone setting menu.
SURROUND: Press
or to select surround
sound feature ON or OFF (see page 23).
SPEAKERS: Press
or to select SPEAKERS
ON or OFF (see page 23).
RESET: Press ENTER to reset BASS, TREBLE and
BALANCE to the factory preset values.
PC connection
Example: Adjust the brightness.
1
During PC mode press MENU.
The menu appears on the TV-
screen.
Press
or to select
(PICTURE) menu.
EXIT : END MENU: RETURN
BRIGHTNESS 25
CONTRAST 50
HOR POSITION 0
VER POSITION 0
PHASE 25
CLOCK 0
2
Press or to select
BRIGHTNESS, then press
ENTER.
Then press
or to adjust the
brightness.
EXIT : END MENU: RETURN
BRIGHTNESS 25
CONTRAST 50
HOR POSITION 0
VER POSITION 0
PHASE 25
CLOCK 0
25
EXIT : END
BRIGHTNESS
MENU: RETURN
25
3
Press EXIT to return to the normal screen.
Note:
The PC mode menu settings are
not effective for normal TV mode or
external input mode.
32L0141B_Eng.indd 3132L0141B_Eng.indd 31 6/7/2007 9:21:21 AM6/7/2007 9:21:21 AM