32
The HDMI input receives digital audio and uncompressed video from a HDMI equipped device or
uncompressed digital video from a DVI equipped device.
When you connect to a DVI device with a HDMI-to-DVI adapter cable, it only transfers the video signal, so it
is necessary to use separate analogue cables to transfer the audio signals.
Select the HDMI1 or HDMI2 input mode (see page 11).
Connecting an HDMI
or a DVI device to the HDMI input
DVI device
HDMI device
To DVI
output
Notes:
As well as HDMI-2, you can also use
HDMI-1 IN to connect to DVI
equipped device - in this case, you
must connect the audio cable to the
HDMI-1 AUDIO/PC AUDIO IN jack.
This set is classed as “HD-Ready”.
This means that it is capable of
displaying HD (High Definition)
signals when connected to a suitable
HD source, such as an HD receiver
or DVD player that has HD capability,
via HDMI, DVI, or Component Video
connections.
Some devices may not operate
properly with the TV.
HDMI, the HDMI logo and High-
Definition Multimedia Interface are
trademarks or registered trademarks of
HDMI Licensing LLC.
•
•
•
Audio cable
(not supplied)
HDMI - to - DVI adapter cable
(HDMI type A connector)
(not supplied)
HDMI cable (type A connector)
(not supplied)
To HDMI output
TV
(Left side view)
Selecting the HDMI audio input source
You must choose the appropriate HDMI audio input setting for
each connection, depending on whether the source is equipped
with a DVI or HDMI socket.
1
Press MENU, the menu will
appear on the screen. Press
or
to select (AUDIO)
menu.
Press
or to select HDMI1
or HDMI2, then press ENTER.
Then press
or to select
HDMI or DVI.
EXIT : END MENU: RETURN
HDMI1 HDMI
HDMI2 HDMI
RESET
HDMI
2
Press EXIT to return to the normal screen.
or
To AUDIO
2 input
32L0141B_Eng.indd 3232L0141B_Eng.indd 32 6/7/2007 9:21:21 AM6/7/2007 9:21:21 AM
To Next Page
Loading...
